System requirements for installing Windows 10

This includes computer specification requirements, versions, and languages available for Windows 10.

How to check computer specification

Step 1 : Press windows logo + R key

Windows logo

Step 2: Type dxdiag and press enter

System requirements for Windows 10 for fresh installation

Processor: 1 gigahertz (GHz)
RAM:  1 gigabyte (GB) for 32-bit or 2 GB for 64-bit 
Hard drive size: 32GB or larger hard disk Note:
Graphics card: Compatible with DirectX 9 or later with WDDM 1.0 driver
Display: 800×600
Internet Connection: Internet connectivity is necessary to perform updates and to download and take advantage of some features.

How to check Hard disk storage

Step 1: Press windows logo + R

Step 2: Type cmd and press enter key

Step 3: Type diskpart and press enter key

Step 4: Type List disk and press enter , this will display hardisk storage for your pc as Disk 0

How to create flash disk bootable

This process involves Windows command prompt  which is known as CMD.  You have to enter some CMD commands. CMD plays an important role in computer, For example cmd can be used to check the serial number of a computer, checking bios information etc. In this tutorial we are going to make flash disk bootable and this flash disk will help us during installation of any other operating system in a computer. Also apart from making flash disk bootable the same process can be used for repairing corrupted flash disk, Sd card e.t.c.  

Bootable process

Step: 1 Press Windows logo + X 

Step: 2 Then press A so as to run cmd administrator 

At the command prompt,

Step 3: Type Diskpart then press enter. Diskpart is command used for storage

Step 4: Type list Disk then press enter, The list disk command displays all the disks on the computer. Note the drive number or drive letter of the USB flash drive.

Step 5. Type select disk , example select disk 1 or select disk 2 

where X is the drive number or drive letter of the USB flash drive like select disk 1 or 2 3  you will realised at this point command prompt will displays all removable and internal storage. This can be used to check your actual internal storage of your pc which is disk 0. 

DO NOT TYPE SELECT DISK 0 Otherwise, you may format your internal hard drive.

Step 6:. Type clean, and the press enter. This command deletes all data from the USB flash drive.

Step 7: Now we need to create a new primary partition on the USB flash drive, Type create part pri, and then press enter.

Step 8. To select the partition that you just created in step 7 above, Type select part 1 and then and press enter.

Step: 9 To format the partition, Type format fs=fat32 quick, and then press enter. fs=ntfs quick if you want to transfer large files
Step: 10. Type active, and then press enter.

Step: 11 Type exit, and then press enter.

8. Type again exit and then click enter.

9. Now your flash disk is bootable you can copy your installation files and proceed. 

More command  and parameters that you should also know


The diskpart tool has the following commands and parameters available:

  • select can set the focus on a specific target.
  • select disk – use this command to set the focus on a specific disk. Command Prompt: select disk  
  • select partition – use the select partition command to set the focus on a specific partition.
  • select volume – use this command to set the focus on a specific volume.
  • detail disk will deliver information about the current disk.
  • detail partition will deliver information about the current partition.
  • detail volume will deliver information about.

The Safest Free Software Download Sites for Windows and other programs

A good Webpage  can protect you against malware some sites contain software’s that are a virus, so it’s better to avoid such free download sites. 

In addition to personal experience, we used these instruments for check webpage reputations and assembling our summary of the best programming download areas: 

Note: No webpage can ever be 100% safe, however these download locales are commonly spotless and advantageous.

1. GETINTOPC.COM

The main goal of getintopc is to provide direct downloading link without any wait so that users can enjoy unlimited downloads. You can also request any software for download.

  If you have any good website  in mind, please let us know. Maybe we can include it when we update the article in future.

How to prevent pc from consuming data bundles while browsing.

How to prevent pc from consuming data bundles while browsing.
METHOD ONE
We introduced a couple of tips that will help you to reduce the data usage on windows operating system. For you to prevent your pc from consuming data bundle, this can be:

  1. Automatic system updates
  2. Syncing.
  3. Apps running in background.
    There are two settings that you need to understand that is system configuration and browser configuration. When pc is connected with phone data, this means no proxy is set.
    System configuration
    When system is set, and configured correctly to any connected network i.e proxy. port or no proxy. Your pc will consume a lot of your data. This will be Automatic system updates, syncing. If you are connected to mobile data, this means no proxy should be applied at this point and your pc will use a lot of bundles. For better understanding follow the steps below.
    Step 1
    Press Windows logo key this is located on the left hand side of keyboard close to fn key and Alt key and type internet options and press enter key, this will open popup windows.

Step 2
Navigate to connection at the menu tab and then LAN SETTINGS

If your pc is connected to mobile hotspot , to prevent it from consuming a lot of data make sure proxy server is checked and give it any address eg 000.00.00.0 press ok to save settings. Now at this point your pc will not use your data since proxy settings are invalid.
Step 3
Open your browser preferably firefox, click at menu , navigate to options then type proxy

Check no proxy

Now you have successfully configured browser internet setting, only browser will consuming data bundles.
METHOD TWO

  1. Disabling background App
    Disabling background running apps can also prevent your pc from consuming data this can be done by steps below:
    Step 1
    Press Windows logo key and type background Apps, turn off apps as shown below.

METHOD 3
Press windows logo + R key to open prompt box.
Type services.msc press enter to pen another windows.
Locate windows updates and double click in the second window select disable and click apply

Have we missed out a step? Let us know in the comment below.

C programming examples

INTRODUCTION

C programming is completely free and readily available on all platforms and easy to understand.

Follow the steps below for you to run C on your computer.

1. You need to download a compiler and install it in your pc you can download DEV -C++ {https://filehippo.com/download_dev-c/} this will work best

2. If you want a quick start, you can also run C program online with your phone or pc. online compiler

This article contains examples on basic concepts of C programming like: switch statement nested, functions, pointers, structures etc.

Request for more examples



1. programmig for temperature conversion from celcius to fahreheit

/* c programmig for temperature conversion from celcius to fahreheit
AUTOR: ORENGO DICKSON
WEBSITE: www.techadvisor.co.ke
PHONE: 0702262007
*/
#include 
int main()
{
	float celsius, fahrenheit;
	printf("ENTER TEMPERATURE IN CELSIUS\n");
	scanf("%f" , &celsius);
	fahrenheit=(1.8*celsius) + 32; //formular for conversion
	printf("THE TEMPERATURE IN FAHREHEIT IS %f\n\n\n\n\n\n\n" , fahrenheit);
	return 0;
	
	
	
}

2. C program to find the biggest of three numbers

/* C program to find the biggest of three numbers. 
AUTOR: ORENGO DICKSON
WEBSITE: www.techadvisor.co.ke
PHONE: 0702262007

*/

	#include 

	 
	void main()
	{
	    int x, y, z;
	 
    printf("Enter the first number\n");
    scanf("%d" , &x);
    printf("Enter the second number\n");
    scanf("%d" , &y);
    printf("Enter the 3rd number\n");
    scanf("%d" , &z);
    
    
	    
	    printf("x = %d\ty = %d\tz = %d\n", x, y, z);
	    if (x > y)
	    {
	        if (x > z)
	        {
            printf("The greatest is X \n");
             }
         else
         {
            printf("The greatest is Z \n");
        }
	    }
	    else if (y > z)
	        printf("The greatest is Y \n");
       else
         printf("The greatest is Z \n");
         
}

3. Program To Accept Student Roll No, Marks in 3 Subjects and Calculate Total, Average and Print it

/*Program To Accept Student Roll No, Marks in 3 Subjects and Calculate Total, Average and Print it.
Autor: ORENGO DICKSON
Website: www.techadvisor.co.ke

*/



#include 
main()
{ 
int r,x,y,z, tot, avg;   //The integer should be six , i.e rollno,three subject, total and average.
printf ("ENTER  STUDENT RNO\n  "); //The user is prompted to enter the roll no.     \n for newline
scanf ("%d",&r);   //scanf is to accept roll no from the keyboard    %d for decimal conversion
printf("ENTER FIRST MARKS \n");  //The user is prompted to enter the first marks., \n for newline
scanf("%d",&x);    //scanf is accept first marks from the keyboard     %d for decimal conversion   &y for number to be entered.
printf("ENTER SECOND  MARKS\n");    //The user is prompted to enter the second marks.
scanf("%d",&y);            //scanf is accept second marks from the keyboard
printf("ENTER THIRD  MARKS\n");   //The user is prompted to enter the second marks.
scanf("%d",&z);        //scanf is accept third marks from the keyboard
tot=x+y+z;     // total formular
avg=tot/3;      //avearge formular
printf("\n\n\t\t EGERTON UNIVERSITY  \n\n"); 
printf("STUDENT RNO %d \n",r); // \t is for spacing or tab
printf("\t FIRST   MARKS %d ",x);  //marks display
printf("\t SECOND  MARKS %d ",y);  //marks display
printf("\t THIRD  MARKS  %d ",z);   //marks display
printf("\t AVERAGE MARKS %d", avg);//marks display
}

4. If-else statement

 

   /* If-else statement
   Autor DICKSON ORENGO
   
   Syntax
       if(expression)
    {
     //Statements
    }
    else
    {
     //Statements
    }
	
	 
   */
   
   
    #include
  
     main()
    {
    int num;
    printf("enter the number\n");
    scanf("%d",&num);
    if(num%2==0)
    {
    printf("%d number in even\n",num);
    
    }
    else
     printf("%d number in odd\n",num);
    
    
    
    return 0;
    
    }

5. NESTED STATEMENT

 /*  AUTOR: OREGO DICKSON NESTED When program requires more than one test     if( expression )    
 {       if( expression1 )     
 {      statement-block1;      }      else       {      statement-block 2;      }     
}     else     {      statement-block 3;     } */ 
#include     
void main( )     
{       
int a,b,c;            
printf("Please Enter 3 number");      
scanf("%d%d%d",&a,&b,&c);      
if(a>b)      
{      
if(a>c)      
{      
printf("a is greatest");      
}      
else       
{      
printf("c is greatest");      
}      
}      
else      
{      
if(b>c)      
{      
printf("b is greatest");      
}      
else      
{      
printf("c is greatest");      
}      
}                
}  

6. SWITCH STATEMENT

/* AUTOR: ORENGO DICKSON */
	#include
   
    void main( )
    {
     char grade;
    printf("ENTER YOUR GRADE\n");
    scanf("%char",&grade);
     
     if (grade == 'A')
     {
     printf("Excellent!");
     }
     else if (grade == 'B')
     {
     printf("Well done");
     }
     else if (grade == 'C')
     {
     	printf("GOOD");
	 }
     else if (grade == 'D')
     {
     printf("You passed");
     }
     else if (grade == 'F')
     {
     printf("Better try again");
     }
     else
     {
     printf("WROG INPUT");
     }
     }

7. Operator, c programming arithmetic

#include 
   
    void main()
    {
     int a;
	 int b;
	 int c;
	  printf("Please Enter 2 number\n");
     scanf("%d%d",&a,&b);
     c = a+b  ;
     printf("Total (a+b) = %d \n",c);
     
     c = a-b;
     printf("Sub (a-b )= %d \n",c);
     
     c = a*b;
     printf("Mul (a*b) = %d \n",c);
     
     c=a/b;
     printf("Div (a/b) = %d \n",c);
     
     c=a%b;
     printf("Remainder (a Mod b) = %d \n",c);
     
    
    }

8. C PROGRAM FOR FINDINNG AREA OF RECTANGLE

/*      Project 2
Instructions
1.	Declare compile and execute the program using c, giving the output
2.	Explain the program process from source to output ie declaration and assigment
3.	Submit handwritten and email zipped copy of the code
                         */
//PROGRAM FOR FINDINNG AREA OF RECTANGLE

//Autor :Dickson Orengo
//website: www.techadvisor.co.ke


#include 

int main() {
   const int  LENGTH = 10;
   const int  WIDTH = 5;
   const char NEWLINE = '\n';
   int area;  
   
   area = LENGTH * WIDTH;
   printf("value of area : %d", area);
   printf("%c", NEWLINE);

   return 0;
}

9. ARITHMETIC OPERATOR FOR C PROGRAMMING

// ARITHMETIC OPERATOR


/*1.	Declare compile and execute the program using c, giving the output
2.	Explain the  program process from source to output, ie declaration assignment
3.	Submit handwritten and email zipped copy of the code


Autor :Dickson Orengo
website: www.techadvisor.co.ke
*/

#include 

// Variable declaration:
extern int a, b;
extern int c;
extern float f;

int main ()    

{

   /* variable definition: */
   int a, b; 
   int c;     
   float f;     
 
   /* actual initialization */
   a = 10;    
   b = 20;   
  
   c = a + b; 
   printf("value of c : %d \n", c); 

   f = 70.0/3.0;        
   printf("value of f : %f \n", f); 
 
   return 0;
}

11. C Program To Read Two Numbers And Print The Sum Of Given Two Numbers

/* Program To Read Two Numbers And Print The Sum Of Given Two Numbers.
Autor: ORENGO DICKSON

*/


#  include 
main()
{ 
int x,y, sum;      //the three integers are two numbers and the result which is the sum
printf ("ENTER VALUE FOR X\n  ");   //This will be printed out , to prompt user what to do. \n is for new line
scanf ("%d",&x);                  // scanf is to accept input from the keyboard, %d is for decimal conversion &x is for number to be entered
printf("ENTER VALUE FOR Y\n");  //This will be printed out , to prompt user to enter the value of Y. \n is for new line
scanf("%d",&y);   // scanf is to accept input from the keyboard, %d is for decimal conversion &x is for number to be entered
sum=x+y;     //This is the result calculation.
printf("SUM OF THE TWO NUMBER ARE %d", sum); 
}

Implementation and evaluation of an arduino based automatic weather station

1 Background

A weather station is that facility on land which has the instruments and devices for observing and measuring atmospheric parameters to provide the information for weather forecast

Weather monitoring is of great importance because it affects many human activities. The study of day-to –day weather requires connection of a couple of instruments together to form a weather station.

A weather station is an observation post where weather conditions and meteorological data are observed and recorded.

Weather forecasting and monitoring is therefore the application of science in predicting the atmospheric conditions of any place. Weather forecasting is done through collection of quantitative and qualitative data of the prevailing state of atmosphere at any given place.

Modern weather station is automated weather stations which are updated versions of common weather stations which have been in existence for centuries. This project seeks to implement a simple micro-controller based display weather station that measures rainfall amount, wind speed and evaporation rate. It will be developed by using Arduino Uno, LCD display, transmitter type IR sensor and ultrasonic water level sensor. A sensor is used for monitoring a real world physical conditions or variables such as wind speed, rainfall amount, and evaporation rate.

An automated weather station is used to minimize human effort. This project will implement and evaluate an Arduino based automatic weather station using an embedded system to monitor the weather parameters through sensors.

Getting more information on the atmosphere, more frequently and from more locations was determined to be one of the key elements to improving forecast and warning. Thus, automatic weather observing system (AWOS) was developed.

Many sensors that make up an AWOS detect different weather elements and can update the official weather observation many times during one hour. The purposes of the automatic weather station are such that they are used for increasing the number and reliability of surface observations. They do this by;

1. Increasing the reliability of the measurements by using the sophisticated technology and modern digital measurement techniques.

2. Satisfying new observation needs and requirements.

3. Reducing human errors.

Weather monitoring has been very important to man over centuries. Weather parameters are the basic tools that can be used to predict the weather.

Typical weather stations have the following instruments;

1. Thermometer for measuring air temperature

2. Barometer for measuring atmospheric pressure

3. Hygrometer for measuring humidity

4. Anemometer for measuring the wind speed

5. Wind vane sensor for measuring wind direction

6. Rain gauge for measuring liquid precipitation over a set period.

Automatic weather station is small in size and easy to install and they also save man power.

The proposed system measures the real time weather parameters automatically.

Download report here

Alternative blink Arduino blink

Arduino LED Blinking Alternative

In this post we will learn how to alternate blink LED with Arduino board.

LED- is light emitting diode that is a semiconductor light source that emits light when current flows through it. It comes with different color. LED has two pin that is Anode and Cathode (smaller pin). Anode is positive pin that is responsible for positive current while Cathode for negative current.

This tutorial will make you to understand how to make alternative LED blinking.

Material

1.       Arduino board X 1pc

2.       Arduino IDE

3.       Led X 2pc

4.       Connecting wire/jumpers

5.       Computer

6.       Fritzing software

Fritzing software

Connect your circuit using the diagram below, for example I’m using Fritzing software to draw this can be downloaded from fritzing.org

Arduino IDE– This will be used for writing code for LED blinking this can be downloaded from www.arduino.cc/en/Main/software copy the source code and place here

Source code.

//blink LED

//Brought to you by DICKSON

int pinA= 7;

int pinB= 5;

Void setup() {

// place your setup code here/ to run once

pinMode(pinA, OUTPUT);

pinMode(pinB, OUTPUT);

}

Void loop() {

//place your main code here, to run repeatedly

digitalWrite(pinA, HIGH);

digitalWrite(pinB, LOW);

delay(1000); //delay time

}

 We have tested the source code below download and use it

Download diagram

Navigation Drawer for an Android App with source code

Navigation Drawer for an Android App with source code In this post, you’ll figure out how to show navigationdrawer in Android in kotlin language. We’ll cover how to utilize the.
DrawerLayout and NavigationView if you are new to Android Development this post will make you understand some of structure used in Android programming.
 The image below is an example of navigation drawer,  The user can view the navigation drawer when they touch menu icon.
How to add Navigation Drawer in Android, follow the steps below
#1. Open blank activity
Launch android studio and give your first application any name
After creating process has finished you can see project structure as shown in the image below.

#1 Adding dependencies .
This are found in build.gradle located in the following directory after android studio is launched           /app/build.gradle before we add any code to build.gradle let’s discuss few things about dependencies.
1. What are dependencies ?
2. Why do we add dependencies ?
In Android Studio, dependencies allows us to include external library or local jar files or other library modules in our Android project.
Example: Suppose I want to show some images in ImageView. But I’m using Glide Library to enhance the smoothness of application. So I have to add a dependency in the build.gradle(Module App) as:
compile ‘com.github.bumptech.glide:glide:3.7.0’
So Now I can use Glide library 🙂 and show my images. This makes it easy to manage external libraries in your project. To learn more about dependencies check here https://developer.android.com/studio/build/dependencies.html
Now open build.gradle file and add the following code below. [module-239]

apply plugin: 'com.android.application'
apply plugin: 'kotlin-android'
apply plugin: 'kotlin-android-extensions'
 
android {
    compileSdkVersion 27
    defaultConfig {
        applicationId "com.eufetresources.androidnavigationdrawer"
        minSdkVersion 15
        targetSdkVersion 27
        versionCode 1
        versionName "1.0"
        testInstrumentationRunner "android.support.test.runner.AndroidJUnitRunner"
    }
    buildTypes {
        release {
            minifyEnabled false
            proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.pro'
        }
    }
}
 
dependencies {
    implementation fileTree(dir: 'libs', include: ['*.jar'])
    implementation"org.jetbrains.kotlin:kotlin-stdlib-jdk7:$kotlin_version"
    implementation 'com.android.support:appcompat-v7:27.1.1'
    implementation 'com.android.support:design:27.1.1'
    implementation 'com.android.support.constraint:constraint-layout:1.1.2'
    testImplementation 'junit:junit:4.12'
    androidTestImplementation 'com.android.support.test:runner:1.0.2'
    androidTestImplementation 'com.android.support.test.espresso:espresso-core:3.0.2'
}
Step 3. Create “drawer_view.xml” menu
Create first “Android Resource directory” and give it a name menu in the following directory /app/src/main/res/  then create resource file “drawer_view.xml” inthe follow directory /app/src/main/res/manu.
Then add the following code,


 

   
        <item
            android:id=”@+id/nav_profile”
            android:icon=”@drawable/ic_launcher_round”
            android:title=”Profile” />
        <item
            android:id=”@+id/nav_wallet”
            android:icon=”@drawable/ic_launcher_round”
            android:title=”Wallet” />
        <item
            android:id=”@+id/nav_offer”
            android:icon=”@drawable/ic_launcher_round”
            android:title=”Offers” />
        <item
            android:id=”@+id/nav_setting”
            android:icon=”@drawable/ic_launcher_round”
            android:title=”Setting” />
   




Once the above code is added you will realized the following code has an error android:icon="@drawable/ic_launcher_round" this can only be fixed by adding image icon named ic_launcher in drawable directory.  app/src/main/res/drawable/
You can download icon here Material icon download link: https://material.io/tools/icons/ and add to (app/src/main/res/drawable/      )   directory.
 



Adding code in  “activity_main.xml” layout file
Open activity_main,xml file and ad the follow code.



    xmlns:app="http://schemas.android.com/apk/res-auto"
    android:id="@+id/drawer_layout"
    android:layout_width="match_parent"
    android:layout_height="match_parent"
    android:fitsSystemWindows="true">

   
    <FrameLayout
        android:id="@+id/content_frame"
        android:layout_width="match_parent"
        android:layout_height="match_parent">

        <android.support.v7.widget.Toolbar
            android:id="@+id/toolbar"
            android:layout_width="match_parent"
            android:layout_height="?attr/actionBarSize"
            android:background="?attr/colorPrimary"
            android:theme="@style/ThemeOverlay.AppCompat.Dark.ActionBar" />
   

   
    <android.support.design.widget.NavigationView
        android:id="@+id/nav_view"
        android:layout_width="wrap_content"
        android:layout_height="match_parent"
        android:layout_gravity="start"
        android:fitsSystemWindows="true"
        app:menu="@menu/drawer_view" />



Setting App Theme
 Open your “values/style.xml” and set the app theme
such as Theme.AppCompat.Light.NoActionBar: 


 
   
   
 

Adding code to MainActivity.kt
Now open MainActivity.kt file and add the following code.

package `com.eufetresource.androidnavigationdrawer
 
import android.support.v7.app.AppCompatActivity
import android.os.Bundle
import android.support.design.widget.NavigationView
import android.support.v4.view.GravityCompat
import android.support.v4.widget.DrawerLayout
import android.support.v7.app.ActionBar
import android.support.v7.widget.Toolbar
import android.view.MenuItem
import android.widget.Toast
 
class MainActivity : AppCompatActivity() {
 
    private lateinit var mDrawerLayout: DrawerLayout
 
    override fun onCreate(savedInstanceState: Bundle?) {
        super.onCreate(savedInstanceState)
        setContentView(R.layout.activity_main)
 
        val toolbar: Toolbar = findViewById(R.id.toolbar)
        setSupportActionBar(toolbar)
        val actionbar: ActionBar? = supportActionBar
        actionbar?.apply {
            setDisplayHomeAsUpEnabled(true)
            setHomeAsUpIndicator(R.mipmap.baseline_menu_white_18dp)
        }
 
        mDrawerLayout = findViewById(R.id.drawer_layout)
 
        val navigationView: NavigationView = findViewById(R.id.nav_view)
        navigationView.setNavigationItemSelectedListener { menuItem ->
            // set item as selected to persist highlight
            menuItem.isChecked = true
            // close drawer when item is tapped
            mDrawerLayout.closeDrawers()
 
            // Handle navigation view item clicks here.
            when (menuItem.itemId) {
 
                R.id.nav_profile -> {
                    Toast.makeText(this, "Profile", Toast.LENGTH_LONG).show()
                }
                R.id.nav_wallet -> {
                    Toast.makeText(this, "Wallet", Toast.LENGTH_LONG).show()
                }
                R.id.nav_offer -> {
                    Toast.makeText(this, "Offer", Toast.LENGTH_LONG).show()
                }
                R.id.nav_setting -> {
                    Toast.makeText(this, "Setting", Toast.LENGTH_LONG).show()
                }
            }
            // Add code here to update the UI based on the item selected
            // For example, swap UI fragments here
 
            true
        }
    }
 
    //appbar - toolbar button click
    override fun onOptionsItemSelected(item: MenuItem): Boolean {
        return when (item.itemId) {
            android.R.id.home -> {
                mDrawerLayout.openDrawer(GravityCompat.START)
                true
            }
 
            else -> super.onOptionsItemSelected(item)
        }
    }
}

Download Source code

 

apk

To create and format a new partition (volume)

To create and format a new partition (volume)

1. Open Computer Management by selecting the Start button. The select Control Panel > System and Security > Administrative Tools, and then double-click Computer Management .
2. In the left pane, under Storage , select Disk Management.
3. Right-click an unallocated region on your hard disk, and then select New Simple Volume .
4. In the New Simple Volume Wizard, select Next .
5. Enter the size of the volume you want to create in megabytes (MB) or accept the maximum default size, and then select Next .
6. Accept the default drive letter or choose a different drive letter to identify the partition, and then select Next .
7. In the Format Partition dialog box, do one of the following: If you don't want to format the volume right now, select Do not format this volume , and then select Next .
To format the volume with the default settings, select Next .

8. Review your choices, and then select Finish .

.

We'd love to hear your feedback and questions about the problem kindly use comment area below.

How to Install a Windows Operating System in any laptop

Installing Windows may sound like an overwhelming  yet it’s actually very simple, if you’re installing  Windows 10, Windows 8 or Windows 7. You don’t need to take your computer to any experts for a simple reinstallation,  you can install Windows by yourself. In this tutorial i will explain the installation process of Windows. 

There are three question to be asked during Windows installation, Why do we install Windows, how to install Windows and where to install Windows.

Why do we install Windows?

1. We install Windows when it has affected by virus e.g shortcuts virus. But it is recommended to run latest anti-virus in your system.

2. If you want to creating partition specified amount of space in drive C, this means drive C should not contain any important files ,

NOTE Please make sure to back up all of your important data before proceeding with this installation . You can use external storage for a backup.

3. For upgrading,  e.g Windows 7 to Windows 8. or 8 to 10

Note: Before upgrading, check to make sure your PC meets the system requirements . For example If your device does not meet requirements for Windows 10, you may not have the great experience intended with Windows 10 and might want to consider purchasing a new computer.

Windows 10 Requirements

You can also go to the PC manufacturer’s website for any additional info about updated drivers and hardware compatibility.

4. Changing 64-bit or 32-bit processor (CPU) , for example 32bit(×86) and 64bit(64) To check this on your PC, go to PC info in PC settings or you can search for System type.

System type.

5. Slow start up. Sometimes slow start up can be affected by virus.

You can also disable start-up program prom task manager

6. Less responsive programs.

7. Hdd hard disk replacement.

If your computer experiences signs of hard drive failure, it’s best to replace it before it completely wears out. An this will need windows installation if you were to buy a new hard disk. The hard drive in your computer stores all of your files and the operating system, which is essential to using the computer. Computers can turn on and display the system BIOS screens without a hard drive, so removing the drive doesn’t damage anything — it just renders the computer useless. You will not be able to launch windows.

How to install Windows

Before you install window there are few things that I have highlighted below.

Requirements:

1. Os (operating system) that is Windows 7, Windows 8, Windows 10 and this can be downloaded from Here .

2. Set your computer to boot from DVD or USB.

For you to install window you need to have a bootable device such as flash disk. I have done this since 2013 and found flask disk is the best atleast 8GB because all operating system are more than 4GB size.

Step 3 – Choose the Windows 10 clean install option